Ports On The Device; Connecting External Devices To The Serial Interface; Port Settings - Fujitsu FUTRO S450 Bedienungsanleitung

Getting started

Ports on the device

Device, Externaldevices, Interfaces
The ports are located on the front and back of the device. The ports available on your
device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
Some of the connected devices require special drivers (see the
documentation for the connected device).

Connecting external devices to the serial interface

Devices, Externaldevices, Serialinterface, Serialinterface
External devices can be connected to the serial interface (e.g. a printer or modem).
► Connect the data cable to the external device.
► Connect the data cable to the corresponding serial interface.
For an exact description of how to connect external devices to the corresponding
port, please see the external device documentation.

Port settings

Serialinterface,
You can change the port settings (e.g. address, interrupt) in the BIOS Setup.
Device drivers
Device drivers,
The devices connected to the serial interface require drivers. Your operating system
already includes many drivers. If the required drive is missing, install it. The latest
drivers are usually available on the Internet or will be supplied on a data carrier.
12 - English
Serial interface, turquoise
Serialinterface
DVI monitor port, blue
Monitorport
Microphone port, light
green
Headphones
USB - Universal Serial
Bus, black
UniversalSerialBus
PS/2 mouse port, green
PS/2mouseport Mouseport
Headphones port,
pink
Microphoneport
Audio input (Line In),
light blue
Linein Audioinput
Audio output (Line
Out), light green
Lineout Audiooutput
RJ45-LAN port
LANport
PS/2 keyboard port,
purple
Keyboardport
A26361-K522-Z226-1-7419, edition 2