Storing; Cleaning, Maintenance And Repairs; Preparing Battery For Operation - Stihl AR 2000 L Gebrauchsanleitung

5 Preparing Battery for Operation

4.8

Storing

WARNING
￭ Children are not aware of and cannot assess the dangers
of the battery and can be seriously injured.
► Store the battery out of the reach of children.
￭ The battery is not protected against all ambient
conditions. The battery may be damaged if it is exposed to
certain ambient conditions.
► Store the battery in a clean and dry condition.
► Store the battery in an enclosed location.
► Store the battery separately from the battery product
and charger.
► Store the battery in non-conductive packaging.
► Store the battery at temperatures between -10°C and
+50°C.
￭ The connecting cable must not be used for carrying or
hanging up the battery. The connecting cable and the
battery may be damaged.
► Wind up the connecting cable and secure it to the
battery.
4.9

Cleaning, Maintenance and Repairs

WARNING
￭ Aggressive cleaning agents, cleaning with a jet of water or
pointed objects can damage the battery, carrying system,
connecting cable and AP adapter. If the battery, carrying
system, connecting cable and AP adapter are not cleaned
0458-820-9921-A
correctly, components may no longer function properly or
safety devices may be rendered inoperative. This can
result in serious injuries.
► Clean the battery, carrying system, connecting cable
and AP adapter as described in this instruction manual.
￭ If the battery, carrying system, connecting cable and AP
adapter are not serviced or repaired correctly,
components may no longer function properly or safety
devices may be rendered inoperative. This can result in
serious or fatal injuries.
► Never attempt to service or repair the battery, carrying
system, connecting cable or AP adapter.
► If the battery, carrying system, connecting cable or AP
adapter need to be serviced or repaired: Contact a
STIHL servicing dealer for assistance.
5 Preparing Battery for Operation
5.1 Preparing Battery for Operation
Perform the following steps before starting work:
► Check the LEDs and beeps, @ 6.3
► If 4 LEDs flash red and short beeps sound in quick
succession: Do not use or transport the battery, contact
your STIHL servicing dealer.
There is a malfunction in the battery.
► Fully charge the battery, @ 6.1
► Clean the battery, @ 17.1
► If you use the connecting cable:
► Clean contacts on the connecting cable, @ 17.2
► Fit the connecting cable or battery and connecting cable
on the carrying system. @ 8
► Make sure the battery is in a safe condition, @ 4.5.
.
► The battery, carrying system, connecting cable and AP
adapter are used: Check that the carrying system,
connecting cable and AP adapter are in a safe condition,
@ 4.5.
English
33