Operation; Transporting - Stihl AR 2000 L Gebrauchsanleitung

English
– Connecting cable plug or plug on battery damaged.
– The AP adapter is damaged.
WARNING
￭ Contact with live components can result in an electric
shock. This can result in serious or fatal injuries.
► Make sure the connecting cable, its plug, the plug on the
battery and the AP adapter are not damaged.
￭ Connecting cable can be damaged if it is not fitted
properly. This can result in injuries and may damage the
connecting cable.
► Position the connecting cable so that it cannot be
touched by the tool of the cordless product being used.
► Position the connecting cable so that it cannot be kinked
or damaged.
► If the connecting cable is twisted: Straighten it out.
4.6

Operation

WARNING
￭ The user cannot concentrate on the work in certain
situations. The user may stumble, fall and be seriously
injured.
► Work calmly and carefully.
► If light and visibility are poor: Do not work with the
battery.
► Watch out for obstacles.
► Stand on the ground while working and keep a good
balance. If it is necessary to work at heights: Use a lift
bucket.
► If you begin to feel tired: Take a break.
32
￭ If you notice any change in the battery during operation, if
it behaves unusually or there is a quick succession of
short beeps, the battery may be in an unsafe condition.
This can result in serious injuries and damage to property.
► Stop work, take the battery off your back and contact
your STIHL servicing dealer.
► If the battery smells unusual or emits smoke: Take the
battery off your back. Do not use the battery and keep it
away from combustible substances.
￭ In an emergency, the user may panic and not put the
carrying system down. This can result in serious injuries.
► Practice removing and putting down the carrying
system.
4.7

Transporting

WARNING
￭ The battery is not protected against all ambient
conditions. The battery may be damaged if it is exposed to
certain ambient conditions and damage to property may
occur.
► Never transport a damaged battery.
► Transport the battery in non-conductive packaging.
￭ The battery may turn over or shift during transport. This
may result in personal injuries and damage to property.
► Pack the battery in packaging in such a way that it
cannot move.
► Secure the packaging so that it cannot move.
4 Safety Precautions
0458-820-9921-A