Autophix 7910 Bedienungsanleitung Seite 8

You need to press [OK] again to clear the fault codes. Or you
can press [ESC] button to give up clearing fault codes, as
follows:
2.2.4 Read Datastream
Choose [Read Datastream] then press [OK] button as follow:
Choose [Select Items] and press [OK] button as follows:
Select Function
View All Items
Select Items
Press [LEFT] and [RIGHT] buttons to page
Press [UP] and [DOWN] buttons to select one by one
Press [OK] button to select the Datastream
Press [ESC] button to read Datastream
Version Information
Erase fault codes had success.
Please wait 10 seconds, Turn ignition
off and Switch on again.
Read fault codes to verify.
Select Function
Version Information
Read Fault Codes
Erase Fault Codes
Read Datastream
2/2
7
4/4
Select Datastream
[v] All Datastream Of Page
[v] Engine speed[rpm]
DISA potentiometer voltage[v]
[v]
Throttle opening[%]
[v]
Throttle opening[%]
[v]
1~4/6