Autophix 7910 Bedienungsanleitung Seite 14

2) View DTCs and their definitions on screen.
The control module number, sequence of the DTCs, total
number of codes detected and type of codes (Generic of
Manufacturer specific) will be observed on the upper right hand
corner of the display.
3.2 Erase Codes
Notes:
This function is performed with key on engine off. Do not
start the engine. Before performing this function, make
sure to retrieve and record the trouble codes. After clear-
ing, you should retrieve trouble codes once more or turn
ignition on and retrieve codes again. If there is still some
trouble codes for hard troubles, please find the reason
caused the trouble code firstly, and then solve the problem.
Now, the trouble codes can be erased.
DTC
P0143
Generic
O2 Sensor Circuit Low Voltage
Bank 1 Sensor 3
13
1/8
Current