Autophix 7910 Bedienungsanleitung Seite 12

Note: The special features of each model are different,
please according to the actual operation.
2.4 Erase All Systems Fault Codes
Choose [Erase All Systems Fault Codes] and it displays as
follows:
Select Function
Basic Functions
Special Functions
Erase All Systems Fault Codes
You need to press [OK] again to clear the fault codes. Or you
can press [ESC] button to give up clearing fault codes. It shows
as the follow after clearing the fault codes.
Note: For BMW car after 2003.
3/3
Information
Erase fault codes had
success.
Please wait 10 seconds, Turn
ignition off and Switch on again.
Read fault codes to verify.
11
Information
Erase fault codes!
Are you sure?