Inhaltsverzeichnis
Werbung
Frequency
The frequency of the present station will be displayed.
Audio bit rate
The display will show the digital audio bit rate being received.
Signal strength
The display will show a slide bar to indicate the signal strength, the stronger the signal, the longer
the bar will be from left to right.
DLS
DLS stands for Dynamic Label Segment which is scrolling message that the broadcaster may
include in their transmissions. The message usually includes information such as programme
details... etc.
Programme type
This describes the style of the programme that is being broadcast. If the information is not available,
the display will show "<Programme Type>".
Ensemble/Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations that are bundled and transmitted together
in a single frequency. There are national and local multiplexes, local ones contain stations that are
specific to that area.
Note: Press and hold INFO button for longer than 2 seconds, the software version number will be
displayed.
FM radio
1.
To select FM, press the MODE button, the display will show FM and the frequency.
2.
To activate auto search, press and hold the ▲ or ▼ button to select your desired station
preset number until it starts to scan up or down the frequency band, the display will show
"Searching...>" and "Searching...<", and it will stop automatically once a station has been
found. (F.6) (F.7)
3.
To activate manual search, repeatedly press the ▲ or ▼ button.
4.
To select audio mode, press the SELECT button to toggle between the "Auto" or "Mono"
selection.
Note: The radio will automatically switch between stereo and mono mode, but you can override this
and switch this function manually which is helpful for poor signal reception.
8
DA18
FM DAB+
Werbung
Inhaltsverzeichnis
