Specifications - Nedo SIRIUS 1 H Bedienungsanleitung

Self-levelling
The SIRIUS 1 H has a self-levelling
feature.
Self-levelling is switched on by pressing
the ON/OFF button. The horizontal beam
(H) begins to rotate.
If the unit is placed in a slanted position
of up to 5° in any direction, the laser
beams are horizontal.
If the range of 5° is exceeded, the
horizontal beam stops rotating andbegins
to flash.
Automatic level monitoring
The SIRIUS 1 H has an automatic level (height) monitoring feature. This becomes active as
soon as the laser is horizontally aligned and the laser beam rotates. In the event of large
vibrations the level monitoring stops rotation of the laser beam, which then begins to flash (tilt
alarm). Minor vibrations are automatically taken into account by the integrated automatic
"horizontalisation" adjustment (plumb alignment of the unit), which keeps the laser plane
horizontal.

Specifications

Model
Ref. No.
Laser configuration
Rotational speed
Levelling accuracy
Levelling time
Thread
Working range
Wavelength
Laser class
Output
Self-levelling range
Power supply
Battery life
Charging time
Operating temperature
Class of protection
Dimensions
Weight
We reserve the right to make technical changes without notice.
Operating Instructions SIRIUS 1 H Rotating Laser
SIRIUS 1 H
471930 / 471930-632
1 laser line due to rotating laser dot
600 rpm
± 0.1 mm/m
< 30 sec.
BSW 5/8" on unit
400 m (diameter) with receiver
635 nm
2 / 3R
<1 mW / < 5 mW
±5° to the horizontal axis, motorised
Set of NiMH 4.8 V rechargeable batteries, including charger
Battery capacity approx. 3800 mAh
approx 30 h
approx 5 h
–20 °C to +50 °C
IP 65
B 150 mm / D 200 mm / H 190mm
2.3 kg
EN
12