Technical Specifications - Vitek VT-1409 W Betriebsanweisung

CLEANING AND CARE
Switch the unit off and unplug it.
–
Wash the hooks (6) or beaters (7) and the
–
bowl (12) with warm water and a neutral deter-
gent, then dry them.
Clean the mixer body (4) and base (10) with a
–
soft, slightly damp cloth, and then wipe it dry.
Do not immerse the mixer body (4), power
–
cord and plug into water or any other liquids.
Provide that no water or detergent gets inside
–
the support (8).
Use neutral detergents to remove dirt; do not
–
use metal brushes, abrasive detergents and
solvents.
STORAGE
Clean the unit.
–
Keep the unit away from children in a dry cool
–
place.
DELIVERY SET
Mixer – 1 pc.
Base – 1 pc.
Bowl – 1pc.
Beaters – 2 pc.
Dough hooks – 2 pc.
Instruction manual – 1 pc.
VT-1409.indd 5

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50/60 Hz
Power consumption: 300 W
The manufacturer preserves the right to change
the specifications of the unit without a prelimi-
nary notification.
Unit operating life is 5 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
5
ENGLISH
06.06.2014 9:08:06