Other Playback Features; Using Repeat Play; Using Random Play; Creating A Program List - Pioneer PD-D9-J Bedienungsanleitung

Getting started
Button What it does

Skips to the next track.
Numbers
Use to enter a track number. Press
(not available ENTER
to select.
with MP3/
• If the disc is stopped, playback
WMA data
starts from the selected track.
discs)
• If the disc is playing, playback
jumps to the start of the selected
track.
FAQ
• Why can't I hear SACD audio through the
digital outputs?
SACD audio is only available through the
analog outputs. This is not a malfunction.

Other playback features

The following features allow you to customize
the playback order. Note that these features
are not available with data discs (containing
WMA/MP3 files).

Using repeat play

There are two repeat play options available
during playback.
• During playback, press REPEAT to select a
repeat play mode.
Select between 1-track repeat (REPEAT lights
in the display), all repeat (ALL REPEAT lights in
the display), or repeat off.
• It's also possible to use 'all' repeat play
together with program play (see Creating a
program list below).

Using random play

Use the random play feature to play tracks at
random. You can set the random play option
when a disc is playing or stopped.
Note
1 You can't use random play together with program play.
2 You can't program pauses, or use program play together with random or 1-track repeat play.
1
Downloaded from www.vandenborre.be
• Press RANDOM to start random play.
Random play remains in effect (RANDOM
shows in the display) until you press  (or
RANDOM again) to cancel.
Tip
• Use the following controls during random
play:
Button What it does

Selects a new track at random.

Returns to the beginning of the
current track.

Creating a program list

This feature lets you program the play order of
2
tracks on a disc.
1 While stopped, press PROGRAM.
2 Use the number buttons and ENTER to
select a track for the current step in the
program list.
If you accidently enter the wrong track, press
CLEAR to delete it.
3 Repeat step 2 to build up a program list.
A program list can contain up to 24 tracks.
To play the program list, press  (play).
4
Program play remains active (PGM shows in
the display) until you stop playback (press
 (play) after  (stop) to start normal
playback).
• Press PROGRAM then  (play) to restart
program play.
• To add more tracks to the program list,
repeat steps 1 and 2.
• When the disc is stopped, press
PROGRAM then CLEAR to erase one track
at a time (from the end of the list), or simply
press CLEAR to erase all tracks.
04
13
En