Remote Control; Using The Remote Control; Display - Pioneer PD-D9-J Bedienungsanleitung

Controls and displays

Remote control

1
2
1 2
3
4 5
7 8
PROGRAM REPEAT
4
SACD SETUP
5
SUPER AUDIO CD PLAYER
 (page 12)
1
2 Playback controls (page 12)
3 Number buttons (page 12)
4 PROGRAM (page 13)
REPEAT (page 13)
RANDOM (page 13)
5 SACD SETUP (page 14)
 OPEN/CLOSE (page 12)
6
7 DIMMER (page 14)
8 PURE AUDIO (page 14)
9 CLEAR
10 ENTER
11 TIME (page 14)
12 LEGATO LINK (page 14)
DIMMER OPEN/CLOSE
6
7
PURE AUDIO
8
9
3
CLEAR
10
6
ENTER
9 0
RANDOM TIME
11
LEGATO LINK
12
Downloaded from www.vandenborre.be

Using the remote control

Keep in mind the following when using the
remote control:
• Make sure that there are no obstacles
between the remote and the remote sensor
on the unit.
• The remote has a range of about 7 m at an
angle of about 30º from the remote sensor.
• Remote operation may become unreliable
if strong sunlight or fluorescent light is
shining on the unit's remote sensor.
• Remote controllers for different devices
can interfere with each other. Avoid using
remotes for other equipment located close
to this unit.
• Replace the batteries when you notice a
fall off in the operating range of the remote.

Display

1 2
TRACK TRACK
7
1 TRACK – Lights when the track number is
indicated.
/ – Light during playback/when paused.
2
3 Scan display – Shows the scan speed.
4 SACD – Lights during SACD playback.
5 LEGATO – Lights when Legato Link Pro is
switched on (page 14).
6 (ALL) REPEAT/RANDOM/PGM – Light to
indicate the playback mode (page 13).
7 Character display
8 TOTAL/REMAIN – Indicate the disc/track
information currently displayed (page 14).
3 4 5 6
LEGATO ALL LEGATO ALL REPEAT REPEAT
SACD SACD TOTAL TOTAL RANDOM RANDOM
REMAIN REMAIN PGM PGM
8
03
11
En