Comfort Heat C 501 Bedienungsanleitung Seite 3

The electronic thermostat C 501 with floor temperature
sensor is designed for heating system control and wall
mounted installation. The thermostat is adjustable to required
temperatures from +5/+40°C. The LED shows that the heat is
ON.
CE MARKING.
requirements of the European Council directive 89/336 and
successive modifications as to electromagnetic compatibility
and the Council directive 73/23 as to electrical equipment to
be applied within certain voltage ranges. Standards EN 61000-
6-3, EN 61000-6-2, EN 60730-1 and EN 60730-2-9 are applied.
The product may only be energised when the entire installation
meets the current directive requirements. The product is
covered by a factory guarantee only when it is installed
in accordance with this instruction guide and the current
installation guidelines.
If the product has been exposed to damage e.g. in transport,
it must be checked and overhauled by qualified staff before
the product is connected to the power. Electronic thermostat
C 501 is a class II device (reinforced insulation) and must be
connected to the following conductors:
Phase (L),
Neutral (N).
3
The electronic C 501 thermostat meets the