Multiple Cooking - Klarstein MaxiWave Bedienungsanleitung

MULTIPLE COOKING

The microwave oven can set 3 period of microwave cooking program
Suppose you want set the following cooking program:
Paragraph 1: Microwave and power level cooking (2 minutes at 100% power level);
Paragraph 2: Microwave and power level cooking (5 minutes at 60% power level);
1. Press STOP/CANCEL pad to reset the oven.
Paragraph 1:
2. Touch POWER LEVEL pad to select "P100" power level.
3. Turn AUTO COOK/TIME/WEIGHT dial to enter cooking time "2:00".
Paragraph 2:
4. Touch POWER LEVEL pad a number of times to select "P-60" power level.
5. Turn AUTO COOK/TIME/WEIGHT dial to enter cooking time "5:00".
6. Press START/+30SEC pad to start.
NOTE: Sensor cooks, Weight defrost, Time defrost and Auto cook cannot be set in
multiple cooking program.
Child lock
Use to prevent unsupervised operation of the oven by little children. The Child Lock
indicator will show on display screen, and the oven cannot be operated while the Child
Lock is set.
To set: In standby mode, press and hold the STOP/CANCEL button for 3 seconds, a
beep sounds and lock indicator lights.
To cancel: Press and hold the STOP/CANCEL button for 3 seconds until lock indicator
light on display turns off.
Failure warning
In the microwave mode, if undetectable feedback signals for five seconds, the system
will stop working, and buzzer constantly issued "DE" hint sound and display "E-1". After
troubleshooting, press the STOP/CANCEL button, the system back to normal standby
mode
Sensor cook
The sensor features detect the increasing humidity released during cooking. The oven
automatically adjusts the cooking time to various types and amounts of food.
Suppose you want to cook potatoes:
1. Place the food in the oven and close the door, press desired sensor menu pads
once to enter menu code, the oven will start automatically one second later and
the display will show "AUTO","[ ]" and COOK.
2. After cooking for a period of time, the system will detect whether there is error, if
there is error, for example, the sensor short circuit or open circuit, the system will
stop automatically with the display showing E-0, beeps sound until touch STOP/
EN
29