Service, Maintenance And Care - Taski Ergodisc series Original Bedienungsanleitung

Service, maintenance and care

The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Attention:
Always remove the mains plug from the
mains socket when carrying out mainte-
nance work!
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
Check the motor ventilation for dust ac-
cumulation, clean if necessary
Empty the spray unit and rinse with
warm water
Clean the tool (brushes)
Clean and dry the pad
Clean the machine with a moist cloth
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
• In order to maintain operational safety and readiness for
use, the machine must be serviced after 250 working hours
or at least once a year.
Notice:
In case of extraordinary use and/or insuffi-
cient maintenance, shorter intervals are
required.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
●
●
● 76
● 76
●
EN
77