Maintenance Instructions - Desoutter RS500-P-18500-1/4"UNF Betriebsanleitung

English

MAINTENANCE INSTRUCTIONS

See page 4 .. 9.
Indicates direction of dismantling.
● All torque figures ± 15%.
● Overmould should be wiped clean with
a general purpose, nonaggressive
degreasant.
The use of spare parts other than those
originally supplied by the manufacturer
may result in a drop in performance or
in increased maintenance and level of
vibration and in the full cancellation of the
manufacturer's liability.
Service should be carried out at intervals
of 1000 hours'use.
Always quote tool model number, serial
number and spare part number when
ordering spares.
When disposing of components,
lubricants, etc... ensure that the relevant
safety procedures are carried out.
Never connect a part assembled tool to
the air supply.
The rotor blades in this tool have a PTFE
content. The normal health and safety
recommendations concerning PTFE must
be observed when handling these rotor
blades.
● Do not smoke.
● Motor components must be washed
with cleaning fluid and not blown clear
with an air line.
● The silencer must be replaced when
dirty, do not clean and re-use.
● Wash hands before commencing any
other activity.
08/2015 11 / 56
2050556783_08
Series: D