Warranty Terms And Conditions - Texas A/S 7600E Bedienungsanleitung

Warranty terms and conditions

The warranty period is 2 years for private end users in EU
countries.
Products sold for commercial use, only have a warranty
period of 1 year.
The warranty covers material and/or fabrication faults.
Restrictions and requirements
Normal wear and replacement of wearing parts are NOT
covered by the warranty.
Wearing parts, which are NOT covered for more than 12
months:
•
Blade
•
Cables
•
Belts
•
Fuses
•
Switches
•
Membranes/gaskets
•
Spark plugs
•
Engine liquids (oil, gasoline)
•
Starter cords
•
Filters
•
Battery: If the battery is not stored correct (frost-free
and recharged every 3 months), the durability is only
guaranteed for 6 months.
If you start the engine without adding oil, it will be
damaged and cannot be repaired and therefore not
covered by the warranty.
The warranty does NOT cover damages/faults caused
by:
•
Lack of service and maintenance
•
Structural changes
•
Exposure to unusual external conditions
•
Damages to the bodywork, deck, handles, panels etc.
•
If the machine has been improperly used or
overloaded
•
Wrong use of oil, gasoline or other liquid types, which
are not recommended in this user manual
•
Bad or dirty gasoline, which results in contamination
of the fuel system
•
Use of unoriginal spare parts.
•
Other conditions where Texas cannot be held
responsible.
Whether a case is a warranty claim or not is determined
in each case by an authorized service center.
Your receipt is your warranty note, why it should always
be kept safe.
REMEMBER: The purchase of spare parts as well as any
request for warranty repair, art. number (e.g. 9006XXXX),
year and serial number should always be informed. It can
be found on the CE-label located on the rearpart of the
cutting deck behind the engine!
* We reserve the right to change the conditions and
accept no liability for any misprints
35