Herunterladen Diese Seite drucken

Werbung

Es ist nicht möglich den
Mahlgradregler zu verstellen
Das Gerät verursacht ungewöhn-
liche Geräusche
Mahlwerk kann nicht korrekt
zusammengebaut werden
EN Troubleshooting Guide
Problem
The appliance does not start
The appliance does not start and
the start/stop is flashing
The appliance does not re-start
and the start/stop button is
fading
It is not possible to adjust the
grinding setting.
Appliance sounds different than
normal
Upper burr can not be assemb-
led correctly

For UK Only

Guarantee Information
All Braun Household products carry a minimum guarantee period of two years. The rights and benefits
under this guarantee are additional to your statutory rights which are not affected.
Please keep your receipt as this will form the basis of your guarantee.
In the unlikely event of a breakdown you have access to professional help from our team simply by calling:
02392 392333
For service in the Republic of Ireland please call: 012475471
Der Mahlgradregler wurde einge-
stellt bevor das Gerät einge-
schaltet wurde
Kaffee-Auslass ist blockiert
Kaffeebohnen sind im Behälter
Mahlwerk ist verstopft
Potential Cause
Not plugged in
Removable upper burr is not
inserted correctly
Coffee ground container is not
inserted correctly
Lid of coffee ground container is
missing
Overheat protection is activated
to avoid burning of coffee
Thermal protector is activated
The grinding setting was adjus-
ted before the appliance has
been switched on
Coffee ground outlet is blocked
Beans are in the container
Burr is dirty
Die Einstellung des Mahlgradreg-
lers erst vornehmen, wenn der
Mahlvorgang bereits gestartet
wurde (bei Stillstand können sich
die Bohnen verklemmen)
Reinigen Sie den Kaffee-Auslass
Kaffeebohnen entfernen
Mahlwerk reinigen
Solution
Plug in
Insert removable upper burr
correctly
Insert the coffee container inclu-
ding its lid correctly
Attach lid correctly to the cont-
ainer
Wait until the fading of the start/
stop button turns off
Check if overheat protection is ac-
tive. If not wait some time, unplug
and plug in again to restart. If the
appliance does not restart cont-
act your service center
Only adjust the grinding setting
when grinding process has alrea-
dy been started (at a standstill,
the beans might jam)
Clean up
Remove the beans
Clean the burr
7

Werbung

loading