CombiSteel 7065.0015 Gebrauchsanweisung Seite 6

Fitting the tap hose
Push the faucet lever down and push the faucet hose downwards (make sure that the tap retainer
is at the front) and gently pull down the faucet hose between the tap handle and the tap body.
Removing the bowl
Fix the bottom of the machine and turn counterclockwise both sides of the bowl. When the bowl tabs are free
of the bowl retainer plastics, remove the bowl by pulling it upwards. While holding the machine's body down
with one hand push the bowl forward and upward in order to remove.
Installing the bowl
First, wet the surfaces where the coolant tank meets the bowl gasket, or lubricate it with food oil. After placing
the bowl gasket as in example 3, place the bowl lugs in front of the bowl retainer plastic as shown in figure 2 and
press downwards. Turn the bowl clockwise to allow the tabs to enter the bowl holder. Put pressure onto the bowl
until it sits firmly on the cooling base.
6
www.combisteel.com