WolfVision VZ-8light4 Bedienungsanleitung Seite 15

Power over Ethernet plus (PoE+)
The LAN port (#19) of the Visualizer includes Power over Ethernet plus (PoE+) functionality. The necessary
power will be provided through the Ethernet cable, this way a separate power line and adapter can be
saved. The Visualizer is compatible with PoE+ power injectors or PoE+ switches according to the
IEEE 802.3at -2009 industry standard.
The PoE+ adapter used must meet the IEEE 802.3at -2009 industry standard. Adapters not meeting this
standard are not compatible with this Visualizer and may have damaging effects!
Power Classification: "High power Class 4 (12.95 to 25.50W)".
More information on PoE+-adapters at www.wolfvision.com (Products / Accessories)
Room Management Systems
The LAN port (#19) and the USB device port (#17) can be used to control the Visualizer through an external
device, such as a room control system that is used to integrate conference rooms.
The complete control protocol can be found on our internet website under: www.wolfvision.com (Support)
Connect the Visualizer to a Network
Connect the Visualizer to the existing network with available DHCP-server and the Visualizer will set
the IP addresses according the DHCP information.
If a DHCP-server is unavailable, please set the addresses for IP, Subnet Mask, Gateway and Nameserver
manually to valid settings.
Security
The Ethernet functionality of the Visualizer can be limited and the access can be protected with a password.
Select "Security Settings" in the on-screen menu Advanced Settings / Ethernet Settings.
Input the valid admin password to change the settings to restrict the functionality of Ethernet. Also the
admin password can be changed afterwards.
Note the changed password! Only WolfVision can reset a forgotten admin password!
Default passwords are "Password" for admin and guest.
14