How To Start - SuperFish IQ40 REEF Bedienungsanleitung

1. unpack
Unpack unit and remove all packaging materials.
2. Remove filter unit
Lift the filter unit out of the aquarium. Hold all the electric cables + airtube and pull the filter unit straight up
by holding the filter unit handle. (for lifting the filterunit the light should be removed!)
3. clean aquarium
Clean the aquarium, accessories and filterunit thoroughly with clean tap water and rinse the aquarium
completely clean. Never use cleaning products or alcohol, and always use a perfectly clean bucket.
4. fit light unit
Insert 2 Lighting arms into the Underlay tray and use screws to fix it. Its height is adjustable, and recommended
to keep space about 10 ~ 20cm between water surface and the light.
5. decide a place
Once water is in, the weight of aquarium tank will be around 60kg, make sure you place the aquarium on a
strong base in a safe place.
6. put gravel in tank
First put special marine gravel into the tank. Marine gravel is available at your dealer.
7. prepare seawater
Capacity of this product is approximately 40L, however considering sand, live rock, and filter materials, it is
likely to hold aproximatly 30 ~ 35L of water.
Prepare Chlorine neutralized water or Demi-water in a bucket, mix with special marine salt accordingly, and
stir until water is clear. Specific gravity must be 1.020 ~ 1.023 while water temperature is 24-26 ºC.
8. live rock
First put live rock before you pour seawater in the tank. 4 ~ 5kg of live rock is recommended. It is
recommended to wash live rock with scrubbing brush and seawater before usage.
9. pour marine water
Add marine water to both the tank and the filter room slowly.
Make sure the water level is as indicated. Checking the water level should
be needed again after the circulation pump starts. Ensure no water leak at
the end of this process.

how to staRt

8
83 cm
41 cm
gB
83 cm
41 cm