Technical Data; Rating Plate - Zanussi ZEV6041XBA Benutzerinformation

WHAT TO DO IF...
Problem
You cannot activate or operate
the hob.
Residual heat indicator does
not come on.
There is a dark area on
the multiple zone.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Make
sure, you operated the hob correctly. If not the
servicing by a service technician or dealer will not

TECHNICAL DATA

RATING PLATE

Modell ZEV6041XBA
Typ 60 AAD 65 ZO
Ser.Nr. .................
ZANUSSI
COOKING ZONES SPECIFICATION
Cooking zone
Left front
Left rear
Right front
Right rear
For optimal cooking results use cookware not larger
than the diameter of the cooking zone.
8
Possible cause
The fuse is blown.
The zone is not hot because it
operated only for a short time.
It is normal that there is a dark
area on the multiple zone.
Nominal Power (Max heat setting)
[W]
750 / 2200
1200
1200
1800
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
If the zone operated sufficiently
long to be hot, speak to an Au-
thorised Service Centre.
be free of charge, also during the warranty period.
The instructions about the Service Centre and
conditions of guarantee are in the guarantee
booklet.
PNC 949 595 544 00
220 - 240 V 50 - 60 Hz
Made in Germany
6.4 kW
Cooking zone diameter [mm]
120 / 210
145
145
180
Remedy