Herunterladen Inhalt Inhalt Diese Seite drucken

Vitek VT-3414 W Betriebsanweisung Seite 4

Blender set
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
ENGLISH
This unit is not intended for usage by children
3.
under 8 years of age.
Children aged 8 and over as well as disabled
4.
persons can use this unit only under supervi-
sion of a person who is responsible for their
safety, if they are given all the necessary and
understandable instructions concerning the
safe usage of the unit and information about
danger that can be caused by its improper
usage.
Do not try to repair the unit by yourself. If the
5.
unit malfunctions, apply to the authorized ser-
vice center.
To avoid damages, transport the unit in origi-
6.
nal package only.
To avoid risk of electric shock or fire, do not
7.
immerse the unit, the power cord and the
power plug of the unit into water or any other
liquids. If the unit was dropped into water:
do not touch the water;
unplug the unit immediately, only after that
you may take the unit out of water;
apply to an authorized service center for test-
ing or repairing the unit.
Keep the unit out of reach of children under
8 years of age.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
BEFORE USING THE UNIT
After unit transportation or storage at low
temperature, it is necessary to keep it for at
least two hours at room temperature before
switching on.
Wash the attachments that will contact prod-
ucts with warm water and a neutral detergent
and dry them thoroughly before use.
Wipe the motor unit (2), whisk gear (8) and
geared lid (7) with a soft slightly damp cloth,
then wipe it dry.
Attention!
Do not immerse the motor unit (2), the
whisk gear (8), the geared lid (7), the power
cord and the power plug into water or any
other liquids.
Do not put the attachments and bowls in a
dishwashing machine.
Continuous operation time
The blender set allows quick and effective oper-
ation, but continuous operation time while using
the blender attachment, whisk, mash making
attachment and while chopping products in
the processor bowl should not exceed 20-30
seconds. Make at least a two-minute break
between operation cycles.
USING THE BLENDER ATTACHMENT
WARNING: Before assembling and installing
attachments, make sure that the power plug
is not inserted into the socket.
Insert the blender attachment (1) into the
motor unit (2), and turn it counterclockwise
until bumping.
Insert the power plug into the mains socket.
Immerse the blender attachment (1) into the
bowl with products that you want to chop/mix.
To switch the blender on, press and hold the
button (4).
If you press and hold the button (3), the unit
will operate at maximum rotation speed. Use
this operation mode for combined processing
of liquid and solid products.
Note:
Products should be put into the bowl before
the unit is switched on. The amount of pro-
cessed products should not exceed 2/3 of
the capacity of the bowl in which the prod-
ucts are processed.
Before starting to chop/mix, we recommend
to peel fruit, remove inedible parts, such as
bones, and cut fruit into 2х2 cm cubes.
After you finish using the unit, take the power
plug out of the socket and remove the blender
attachment (1), turning it clockwise.
Attention!
Do not remove the blender attachment (1)
during operation.
To avoid damaging the blades, do not pro-
cess too solid products such as cereals,
rice, spices, coffee beans, cheese, frozen
products.
When you use the blender attachment and
the products are hard to chop, add some
water, if it is possible.
USING THE WHISK
Use the whisk attachment (9) only to beat cream,
make biscuit dough or for mixing ready desserts.
WARNING: Before assembling make sure
that the power plug is not inserted into the
mains socket.
4

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis