Content Of Delivery; Installation - Emos H2011 Montageanleitung

GB
VIDEO DOOR PHONE SET

1 | Content of delivery

videomonitor
mounting bracket for monitor
outdoor camera unit
power supplier PSU 12 V DC
screws
2 | Technical description of the videomonitor
1
1 | speaker
2 | monitor ( preview )
3 | lock 1
4 | lock 2
5 | talk
6 | microphone

3 | Installation

1 | Choosing the place of the monitor installation
Choose the place for installation of the videomonitor
with regards to the cable preparation. Anyway it is
recommnended to install the videomonitor approximatelly
at about the eye height of the user.
2 | Installation of the videomonitor bracket
Mark the bracket fixing holes on the wall. Drill the holes
out and put the wall plugs in. It is also necessary to make
a bigger hole in the middle of the bracket for all cables
connected to the monitor. (camera cable and PSU cable
and door release cables). Screw the bracket on the wall.
2
1 pc
1 pc
1 pc
1 pc
6 pcs
2 3 4 5
7 | brightness
8 | chroma
9 | speech volume
10 | melody selection
11 | melody volume
3 | Wiring the camera and monitor
Connect the outdoor camera to the monitor by cable
according to the wiring scheme. To avoid damaging
the system please double check the wiring is correct.
4 | Fitting the monitor on the bracket
Attach the back of the monitor hold points to the bracket.
Use mild force to press and slide the monitor down on the
bracket to get it clicked in. The monitor is fixed.
5 | PSU connection
Plug the power supplier into the socket with the mains
230 V AC / 50 Hz.
Plug the power connector into the described connection
on the back of the videomonitor.
11
10
7
8
9