Technical Data; Intended Use; Safety Information; Storage, Cleaning - Livarno Living IAN 309696 Gebrauchsanweisung

Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following in-
structions for use.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.
Package contents (Fig. A)
1 x shelf (1)
1 x slatted shelf (2)
4 x legs (3)
2 x cross braces (4)
8 x screws, long (5)
4 x screws, medium length (6)
1 x screw, short (7)
1 x tape for mounting to the wall (8)
2 x washers (9)
1 x Allen key (10)
1 x instructions for use

Technical data

15 Maximum load: 15kg
Date of manufacture (month/year):
10/2018
Dimensions: approx. 84 x 70 x 28cm
(W x H x D)

Intended use

The item is not intended for commercial use. The
item is designed for indoor use.

Safety information

Life-threatening hazard!
• Never leave children unattended with the
packing materials. There is a risk of suffoca-
tion.
6 GB/CY
Risk of injury!
• Ensure the item is properly stabilised before
using it.
• Place the item on a level surface.
• The item may only be used with adult supervi-
sion, and should not be used as a toy.
• The item is not a toy or a climbing apparatus!
Ensure that persons, especially children, do
not pull themselves up on the item or lean
against it. The item may fall over.
• Check the item for damage or wear before
each use.
• Never stand or sit on the item.
• Ensure that the item has been assembled
properly and in accordance with these instruc-
tions for use. Improper assembly can lead
to injuries and impair the item's safety and
functionality.
• Make sure the wall is suitable for mounting
the item. Unsuitable wall surfaces can lead to
injuries.
Assembly
To assemble the item you will need the Allen key
(enclosed) (10), as well as the following tools
(not included): Phillips screwdriver, hammer and
drill.
1. Assemble the item as shown in figures B–D.
2. The item must be mounted to the wall for
optimum stability (Fig. E).
Note: Only use suitable fitting accessories (not
included) for mounting the item to the wall. Get
advice from a professional if necessary.

Storage, cleaning

Always store the product in clean and dry condi-
tion at room temperature.
Only use water to clean and wipe it dry with
cleaning cloth.
IMPORTANT! Never clean the product with
aggressive cleaning agents.