Maintenance; Troubleshooting; Packing List - V2 WISANT-Serie Bedienungsanleitung

MAINTENANCE

Make sure the door is in good working condition and that it is correctly balanced.
The door operator should be checked and maintained by a qualified technician.
Keep operator clean at all times.

TROUBLESHOOTING

Error
The operator does not
work
The operator stops
working suddenly
The door cannot be
opened or closed
completely

PACKING LIST

After receiving the product, you should make an unpack-inspection, in which you should check whether the product was damaged. If you
have any problem please contact our sales agent. You should find the following items in our standard packing:
No. Item
1 Door operator
2 Wall bracket
3 Spacer ring and screw
4 Hexagonal wrench key
5 Key
6 Bolt (M10X20)
7 Washer
8 User's manual
Cause for error
(1) Power is OFF.
(2) The door is obstructed.
(3) The wires become loose.
(4) The emergency switch was pressed.
(5) The door is too heavy.
Thermal overload protection in
motor is active
Wrong adjusting of limit switch
Solutions
(1) Make sure that power is ON.
(2) Remove obstructions.
(3) Fasten the wires.
(4) Rotate the emergency switch to ensure that the
button returns to its original position.
(5) Replace or readjust the balance springs.
Allow the motor to cool down
Readjust the limit switch
Quantity
1
1
2
1
1
4
4
1
16