Overview Of Operating Elements And Indicators; Security Precautions; General; Intended Purpose - Babyfon BM 850 Bedienungsanleitung

GB
2

Overview of operating elements and indicators

A Transmitter (baby)
B Receiver (parents)
C Display
D AC adapter / plug-in charger
E Rechargeable AAA battery packs
A Transmitter (baby)
A1 Display
A2 Confirmation button (OK)
A3 Selection buttons (DOWN/UP)
A4 Mode button (MODE)
A5 Microphone
A6 Connection socket for plug-in charger
A7 Control lamp for plug-in charger
A8 Belt clip
A9 Battery pack compartment
B Receiver (parents)
B1 Display
B2 Confirmation button (OK)
B3 Selection buttons (DOWN/UP)
B4 Mode button (MODE)
B5 Speaker
B6 Connection socket for plug-in charger
B7 Control lamp for plug-in charger
B8 Belt clip
B9 Battery pack compartment
C Display
C1 Transmission range indicator
C2 Alarm symbol
C3 Channel indicator
C4 Name display
C5 Battery pack status indicator
C6 Response sensitivity / volume
C7 Transmission / reception mode indicator
3

Security precautions

3.1

General

Before using the device for the first time, read these instructions carefully and keep
them in a safe place for future reference.
Under no circumstances is the BABYFON ® BM 850 a substitute for personal
supervision.
If the device can no longer be used, consult your local waste disposal organisation
regarding correct disposal measures.
If you pass on the device to a third party, please include the instructions.
3.2

Intended purpose

The BABYFON ® BM 850 was developed to transfer voice signals / sounds made by
children. Signal tones, e.g. from breathing or heart tone monitoring equipment, cannot be
transmitted!
18
GB
Use of the BABYFON ® BM 850 cannot replace, but only support the personal
supervision of a child or person in need of care. We point out that we do not accept any
responsibility whatsoever not covered by legal guarantee regulations. This applies in
particular to this Babyfon being used for medical purposes for which it is not intended.
The device is designed for private use.
3.3

Electro-smog in children's rooms

Due to the low radiation level there is no risk to your child's health as a result of
electro-smog, according to current knowledge.
We nevertheless recommend that you keep a safety distance of at least 1 metre
between your baby and the BABYFON ® BM 850. The functionality of the BABYFON ®
BM 850 is not impaired by the safety distance!
Never place the transmitter inside the child's cot or playpen.
The original Babyfon is equipped with a voice control feature that allows the device
to transmit only when your child actually makes a sound. Therefore the BABYFON ®
BM 850 transmits only when required and not permanently. This sensible function
prevents superfluous electro-smog.
When using plug-in chargers (AC adapters) you can minimise low-frequency magnetic
fields by keeping a distance of 1 to 2 metres between the wall socket and the child's cot.
Your Babyfon is equipped with intelligent charging technology.
The plug-in charger becomes active only when the battery packs have been discharged
below a certain lower limit. It then charges the battery packs up to a certain upper limit
and becomes inactive again; the battery packs are now used as the power source. This
means that you have optimal protection from additional electro-smog, even when the
battery packs are being charged.
This ensures that there will be no risk of electro-smog from the BABYFON ® BM 850 for
your child.
3.4

Protecting the devices

When the devices are running they need sufficient air supply.
If you use batteries, remove them if the devices are not used for a long period as
they could otherwise leak.
Switch off the devices after use.
Protect electronic devices from moisture.
The devices must under no circumstances come into contact with liquids. Therefore
make sure that they are not submerged under water and that no liquid gets inside
the casing.
Protect electronic devices from temperatures above 40 °C. Therefore do not leave
your BABYFON ® BM 850 in strong sunlight and never place it on hotplates or close
to other heat sources.
Always check before use that your BABYFON ® BM 850 functions correctly (see
"4.3 Function test").
Defective devices must not be used.
Never carry out repairs yourself; contact your dealer if the need arises.
Never use caustic detergents to clean the devices as these could damage the plastic
surfaces.
Clean the devices with a dry or slightly moist cloth.
3.5

Using the plug-in charger

Connect the device only to a correctly installed mains socket with voltage which
corresponds to that given on the nameplate of the plug-in charger.
Make sure that connecting cable is not positioned so that people could trip over it.
Make sure that the connecting cable is not pinched, crushed or stretched.
When using an adapter or an extension cable, make sure that these comply with
valid safety regulations. The maximum current given must not be exceeded.
19