Technical Data - Niko 0-10 V Bedienungsanleitung

Error codes
When the module is functioning properly, the STATUS LED will light up in TEST mode only. If one or several errors occur,
the LED will blink to indicate the error code of the error with the highest priority. The table below provides an overview of
all error codes.
LED ACTION
STATUS LED Blinks – one pulse per two
seconds.

Technical data

• 3 outputs: 0-10 V (FELV, functional extra-low voltage), voltage-controlled (U)
• maximum distance between dimmers and module: 50 m
• maximum load: 10 mA per channel
• short circuit protection per channel
• connection terminals for 3 x 1,5 mm² or 2 x 2,5 mm² or 1 x 4 mm²
• dimensions: DIN 2U
• sliding contact
• ambient temperature: 0 - 45 °C
• CE marking
ERROR POSSIBLE SOLUTIONS
Software error Wrong software version.*
*Download the latest software version
from the Niko website to upgrade the
module.
20. Analogue control module 0-10 V
121