Roborock S5 Max-Series Benutzerhandbuch Seite 18

Installation
Connect to the app
5.Connect to the app.(recommended)
➀Download the Roborock app or Xiaomi home app
a. Search "Roborock" in the App Store or Google Play, Or
scan the QR code below, then download and install the app.
b. Search "Xiaomi home" in the App Store or Google Play, Or
scan the QR code below, then download and install the app.
➁ Reset WiFi
a. Open the top cover of the robot to reveal the WiFi
indicator light.
b. Press and hold the
you hear the "Reset WiFi" voice alert. When the WiFi
indicator light is flashing slowly, the robot has entered
network configuration mode.
Note:
If you cannot connect your phone to the robot, reset the WiFi, and add your
robot as a new device.
button and the button until
➂ Add device
Open the app and click "+" in the top right corner, then
follow the instructions in-app. Once your robot has been
added, it will be found in a list on the homepage.
Note:
• Due to ongoing app development, the actual process may differ slightly
from the above description. Always follow the instructions given in the app.
• Only 2.4GHz WiFi is supported.
��
WiFi indicator light
• Off: WiFi disabled
• Slow flashing: Waiting for
connection
• Fast flashing: Connecting
• Steady: WiFi connected