Asus PhysXP1 Schnellstartanleitung Seite 9


6. Align and insert the PhysX card into the PCI slot until it seats in place.
Make sure the goldfingers are properly inserted to the slot.
7. Secure the bracket screw that holds the PhysX card in place. Refer to the
picture below for the barcket screw hole.
8. Connect one 4-pin Peripheral Power Cable to the power connector on the
card as shown below.
4-pin Peripheral Power Cable
Goldfingers
ASUS PhysX
bracket screw hole
Installation Guide
TM