Maintenance And Cleaning; Ventilation System - Grex G6.2 Sicherheit Und Gebrauchsanleitung

4

MAINTENANCE AND CLEANING

Remove the Pinlock
clean it with neutral liquid soap.
Remove the soap under running water.
Dry the inner visor with dry and lukewarm air without wiping it.
To keep the features of the inner visor in good conditions over time, let the helmet dry
in a ventilated and dry place with the visor open after use.
Keep it away from heat sources and store it in a place away from direct light.

VENTILATION SYSTEM

1 TOP VENTILATION SYSTEM (FIG. 11)
The innovative top ventilation system allows conveying air into the shell:
- A position (button on the front) ventilation system closed
- B position (button on the back) conveys air into the shell
2 LOWER VENTILATION SYSTEM (FIG. 12)
The innovative lower ventilation system is controlled by a practical, easy to handle de-
vice that, located on the bottom of the chin guard, allows conveying air directly to the
visor to limit fogging and formation of condensation:
A) close
B) open
3 REAR EXTRACTOR (FIG. 13)
The rear extractor, located under the spoiler, ensures optimal heat dissipation.
WIND PROTECTOR
This accessory allows improved helmet performance under certain conditions of use.
The Wind Protector prevents unpleasant infiltrations of air under the chin.
See Fig. 14 for the assembly and disassembly.
inner visor from the visor. Using a damp and soft cloth, gently
®
INSTRUCTIONS FOR USE
G6.
2
13