Viatom Checkme O2 Bedienungsanleitung Seite 9

2)
Then input the last 4 digits of SN on the back of your
device main unit.
2.11 Real-time Dashboard
You can check real-time SpO
1) Connect device to App.
2) App->Dashboard.
2.12 Smart Vibration
The vibrator in the sensor will be activated when the SpO
below the pre-set value (Threshold). The vibration will stop
when the SpO
You can customize the vibration to help you sleep
better. Make sure your device is connected to
App first. Then you can configure it in
App->Settings.

You can switch on or off the vibration.

You can adjust the Intensity of vibration.

You can adjust the Threshold. If the vibration disturbs
you during sleep too much, you can lower the
Threshold. If you would like to get more protection
from oxygen shortage, you can turn up the Threshold.
2.13 View Results and Report
In App, you can review all the history
data. Touch a record, there comes out
the detailed report, which includes
analysis results and charts.
recover, or you can press the button to stop it.
2
, Pulse Rate in App.
2
10
fall
2