Bluetooth Connection - Viatom Checkme O2 Bedienungsanleitung

2.8 Operation Mode Navigation
The device has two operation modes: Sleep Mode and Living
Mode.
Turn on the device, during the icon blinking, press the button
to switch between two modes.
Parameters
Screen
The Sensor
Vibrates
Bluetooth
Report
2.9

Bluetooth Connection

The device Bluetooth will be enabled automatically only when
the screen lights up.
To establish a Bluetooth connection,
1) Ensure the device screen is on to keep the device
Bluetooth enabled.
2) Make sure the phone Bluetooth is enabled.
3) Run the App, then select the Device ID for the initial use.
Note: DO NOT PAIR in the settings of your smartphone.
2.10 Add a new device
For the initial use, you need to add a new device.
1) Turn on device, run App, select <Checkme O2>;
Sleep Mode
SpO , PR, Motion
2
Activated by button
When SpO is
2
lower than
threshold set
On when the screen
lights up
Sleep report
When SpO
than threshold set；
Or when step goal is
9
Living Mode
SpO , PR, Steps
2
Always on
is lower
2
met
Always on
Living report