Connection Examples - Epson WirelessHD Transmitter Bedienungsanleitung

(orange)
(green)

Connection Examples

Connection examples of the WirelessHD Transmitter and EPSON projector are described
below.
Connection Example 1. Listening to Audio with a Speaker
or Sound Bar
HDMI
cable
TV
Optical
cable
Speaker/
Sound bar
v If you want to output the audio of a connected device, purchase a commercially available
optical cable.
v An HDMI or MHL device connected to the WirelessHD Transmitter can be controlled with
the projector's remote control. However, the remote control may not work if an MHL-HDMI
conversion adapter is used.
The WirelessHD Transmitter is in standby
status. If you cancel standby with the [t] button
on the WirelessHD Transmitter or the [t]
button for WiHD Transmitter control on the
lower section of the remote control, images can
be output to a monitor device connected to the
Output port, such as a television. If the monitor
device meets HDMI CEC standards, the HDMI
Link function is available with the monitor's
remote control.
Power saving status is entered when no
communication occurs for a certain time
(approximately 30 seconds). When a signal is
(flashing
input, power saving status is canceled and
slowly)
communication restarts.
Projector
WirelessHD Transmitter
HDMI
cable
Blu-ray
recorder
HDMI
cable
Set-top box Smartphone
MHL cable
(HDMI5 port only)
11