Epson WirelessHD Transmitter Bedienungsanleitung Seite 10

Indicator Status
a t indicator (orange/green)
b WiHD indicator (orange)
c Link indicator (orange)
t
(green)
(green)
(green)
(green)
(green)
(green)
(orange)
10
WiHD Link
Power is off.
WirelessHD communication is available at
startup.
WirelessHD communication is unavailable at
startup.
Startup has been completed successfully but
WirelessHD communication is unavailable.
Although the WirelessHD Transmitter cannot
communicate with the projector, images can be
output to the television or other monitor device
connected to the Output port.
WirelessHD communication is available while
searching for the projector.
The WirelessHD Transmitter is connected to
the projector but no image signal is received
from an HDMI device.
Images are being projected.
The WirelessHD Transmitter is in standby
status. To cancel standby, press the [t] button
on the WirelessHD Transmitter or the [t]
button for WiHD Transmitter control on the
lower section of the remote control.
: Lit/ : Flashing/
Indicates
: Off