Philips FC6161 Bedienungsanleitung Seite 14

English
14
2
1
2
1
6 Place the inner filter back onto the filter holder (1) and turn it
anticlockwise to attach it (2).
7 Place the outer filter back onto the filter holder (1) and turn it
anticlockwise to attach it (2).
8 Put the filter unit back into the dust compartment.
Note: Make sure you insert the filter unit in the correct way.
9 To reattach the dust compartment, align the slot on the dust
compartment with the projection on the appliance. First attach the
bottom of the dust compartment (1) and then push the top of the
dust compartment towards the appliance (2) until it locks into place
('click').
Cleaning the floor nozzle joint
The joint of the floor nozzle may get blocked by large dirt particles. Follow
the steps below to clean the joint.
1 Switch off the appliance.