KikkaBoo TRINITY Gebrauchsanweisung Seite 5

5. Installing the canopy. Push up the mount on both ends and then the canopy will be removed. It is installed if operated reversely.
6. Adjusting the leg rest. Pressing the adjusting key on both ends of leg rest to adjust the leg rest downwards. When you push up them. It
can go back to original position.
7. Adjusting the back rest. One hand push up the adjusting key to adjust the angle of back rest while you hold the adjusting strap with
another hand.
8. Front handle bar. Install the locking key on both sides into the lock mount of stroller frame and it is done. Pressing the round button and
pull it out during dis-assembly.
9. Fold the stroller:
a.) clear the cover fabric on the seat.
b.) pull up the unlock strings on the seat to fold the stroller.
c.) fold the stroller inwards.
d.) when you hear the "click" sound, the hook will be automatically hooked and the folding is done.
10. a.) Lock of harness: plug the male plug into female plug and it is done when you hear" click" sound.
b.) Release the harness: pressing down the round button in the middle and pull up the belt.
c.) Adjusting the harness: the harness can be adjusted to tight length or loose one depends on how comfortable baby sit in in
case there is accident happened due to too loose harness.
WARNING: SAFETY BELT MUST BE USED FOR CHILDREN AT ALL TIMES.
11. Assembly and dis-assembly of supporting plate:
a.) tting the supporting plate into the mounts on both sides of frame and press them until you hear the sound of "click".
b.) during dis-assembly, pressing the button on the supporting plate and pull it up. It is done.
(supporting car seat or pram)
12. Optional parts
a.) combo of car seat and stroller
b.) combo of stroller and pram
MAINTENANCE COMMON SENSE
Fabric parts: 1. The fabrics of the stroller must be cleaned with warm water and mild soap. After cleaning let the stroller get completely
dry before you use it. If is absolutely forbidden to fold it and store it before it is completely dry.
2. Do not use strong cleaning agents, bleach or agents with abrasive particles, in order to clean the product. It is forbidden to clean it in a
washing machine, dryer, dry cleaning, bleach and tumble-dry it.
Plastic and metal parts: 1. The plastic and metal parts must be cleaned with a damp soft cloth and dried with dry soft cloth.
2. Do not let the product exposed to the harmful e ect of external factors - direct sunlight, rain, snow or wind. This may lead to damage of
the metal and plastic parts and fading of the fabrics of the crib.
3. When you are not using the product, store it at a dry and well ventilated place, not in dusty, humid premises with very high or very low
room temperatures.
4. Please check if have loose screw, broken parts or suture line regular. If necessary, please change the broken parts. Please read this
instruction carefully before using it.
ENGLISH