Specific Safety Information; Lt1000 Safety; Description, Specifications And Standard Equipment; Description - RIDGID SeeSnake LT1000 Bedienungsanleitung

• If the product has been dropped or damaged in
any way; or,
• When the product exhibits a distinct change in
performance.

Specific Safety Information

WARNING
This section contains important safety information
that is specific to this equipment.
Read these precautions carefully before using the
LT1000 to reduce the risk of electrical shock or other
serious personal injury.
SAVE THESE INSTRUCTIONS!
Keep this manual with the machine for use by the op-
erator.
The EC declaration of conformity (890-011-320.10) will
accompany this manual as a separate booklet when re-
quired.
If you have any question concerning this RIDGID® prod-
uct:
– Contact SeeSnake HQ Support Department at
HQSupport@seesnake.com for questions relating to
HQ.
– Contact your local RIDGID® distributor.
– Visit www.RIDGID.com or www.RIDGID.eu to find your
local RIDGID contact point.
– Contact RIDGID Technical Services Department at
rtctechservices@emerson.com, or in the U.S. and
Cana da call (800) 519-3456.

LT1000 Safety

• An improperly grounded electrical outlet can
cause electrical shock and or severely damage
equipment. Always check work area for a prop-
erly grounded electrical outlet. Presence of a three
prong or GFCI outlet does not insure that the outlet
is properly grounded. If in doubt, have the outlet in-
spected by a licensed electrician.
• Use only a battery or the included isolated power
supply to power the LT1000. Use batteries or an
isolated power supply with any laptop used with
the LT1000. This minimizes the risk of electrical haz-
ards from moisture or faulty electrical outlets.
• Do not operate this equipment if operator or
machine is standing in water. Operating machine
while in water increases the risk of electrical shock.
• The LT1000 is not waterproof. It is dust-resistant
and splash-resistant. Do not expose the equip-
ment to water or rain. This increases the risk of elec-
trical shock.
SeeSnake® LT1000
• Do not use where a danger of high voltage con-
tact is present. The equipment is not designed to
provide high voltage protection and isolation.
• Read and understand this operator's manual,
the reel operators' manual and the instructions
for any other equipment in use and all warnings
before operating the LT1000. Failure to follow all
instruction may result in property damage and/or
serious personal injury.
• Always use appropriate personal protective equip-
ment while handling and using equipment in
drains. Drains may contain chemicals, bacteria and
other substances that may be toxic, infectious, cause
burns or other issues. Appropriate personal protec-
tive equipment always includes safety glasses, and
may include equipment such as drain cleaning
gloves or mitts, latex or rubber gloves, face shields,
goggles, protective clothing, respirators and steel-
toed footwear.
• If using drain cleaning equipment at the same
time as using drain inspection equipment, only
wear RIDGID Drain Cleaning Gloves. Never grasp
the rotating drain cleaning cable with anything else,
includ ing other gloves or a rag. They can become
wrapped around the cable, causing hand injuries.
Only wear latex or rubber gloves under RIDGID Drain
Clean er Gloves. Do not use damaged drain cleaning
gloves.
• Practice good hygiene. Use hot, soapy water to
wash hands and other exposed body parts exposed
to drain contents after handling or using drain in-
spection equipment. Do not eat or smoke while
operating or handling drain inspection equipment.
This will help prevent contamination with toxic or
infectious material.
Description, Specifications And
Standard Equipment

Description

The SeeSnake® LT1000 is a convenient interface and
platform which allows any standard laptop to serve
as a SeeSnake Inspection monitor, and can be used to
automatically capture photos, motion clips and sound
recordings from a SeeSnake Pipe Inspection System. It
provides a convenient interface to SeeSnake HQ report
generating and video managing software to make cre-
ating and managing customer reports quick and easy.
The LT1000 also provides a robust laptop platform to
which the laptop can be rapidly secured and connect-
ed, and easily removed when needed. Two platform
wings may be used to increase the work platform area.
5