Hama 47123 Bedienungsanleitung Seite 9

Procedures for Flash to CD-R
Step 2 : Open
Step 4 : Mode
2
4
5
Step 5 : Stop/Ext
3.4. External 6-in-1 Card Reader
3.4.1. Install drive for your PC :
Card reader driver guide
(1) Find the setup.exe in Driver CD , the path is "
CardReader_Driver\Windows, and run it.
(2) Press "Next" to start installation.
(3) After installation completed , select "Yes" and
press OK to restart Windows system.
(4) Double click "My Computer", you will see
four icons for the card reader.
(5) If you need to UNINSTALL this card
reader driver , please refer the following
instructions :
Uninstall:
Select "Start -> Programs -> Card Reader
Driver -> CRW Series Driver Uninstaller" to
uninstall the driver.
(6) Prepare to Uninstall, or press "Cancel" to
abort uninstall.
(7) Choose Remove and press "Next" to start
uninstall.
(8) Uninstall in progress, press "Cancel" if you
want to abort uninstallation.
(9) Press "Finish" to end the uninstall.
3.4.2. Steps to switch to external Flash Card Reader:
1. Insert Flash Memory card to correct slot of the
unit front panel.
2. Press the Power button, the LCD screen will
show "CD" as Fig 9
Fig 9
3. Press the Mode button, the LCD screen display
will change from "CD" to "Copy". as Fig 10
4. Press the Stop/Ext. button, the LCD screen dis
play will change from "Copy" to Ext. as Fig 11
5. Turn on the PC power and waiting for complete
system boot-up sequence finish.
6. Connect a PC to Mobile DataSafe CD - RW
through a USB 1.1 socket, the LCD screen will
show Ext. 1 and the PC will detect and identify
the card reader. as Fig 12
Fig 10
Fig 11
Fig 12