Herunterladen Diese Seite drucken

Hama 47123 Bedienungsanleitung Seite 8

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Procedures for Flash to CD-R
Step 2 : Open
Step 5 : Mode
2
5
6
Step 6 : Play/Copy
3.3. External CD-RW
3.3.1. Install driver for your PC :
USB2.0 SETUP INSTRUCTION: (Needed only for Win98)
(1) When user change to Ext. Mode, and USB2.0 Cable
is inserted to PC, PC will find the new hardware,
Please press the "Next" button as below.
(2)Select this item "Search for the best driver for your
device [Recommended]", and press "Next" button.
(3)Select " Specify a location:", and press the "Brow-
se" button.
(4)To find the folder of USB 2.0 Driver (named as Win-
dows_vXXX) on the Driver CD location, then press
the "OK" button.
(5)Press the "Next" button.
(6)Windows 98 will search the driver by our assigned
driver. Press the "Next" button.
(7)Windows has finished the USB Storage Adapter
AT2(TPP) Driver installation. Press the "Finish" but-
ton.
(8)Please go to Windows' Control Panel screen, choose
"add/remove programs properties" , click
Install/Uninstall to check your installed files:
Make sure the "USB Storage Adapter" item is
installed properly and displayed in this screen.
3.3.2. Steps to switch to external CD-RW :
1. Press the Power button, the LCD screen will show
"CD". as Fig 5
Fig 5
2. Press the Open button, the top cover will flip up.
3. Load a CD-R (CD-RW) disc and close the top cover of
Mobile DataSafe CD – RW.
4. Press the Mode button, the LCD screen display will
change from "CD" to "Copy". as Fig 6
Fig 6
5. Press the Stop/Ext. button, the LCD screen display
will change from "Copy" to Ext. as Fig 7
6. Turn on the PC power and waiting for complete
system boot-up sequence finish.
7. Connect a PC to the unit though a USB 2.0 socket,
the LCD screen will show Ext. 2 and the PC will
detect and identify the CD-RW device. as Fig 8
8. Use PC burning software such as NERO* to back up
your files from PC to the CD-R (CD-RW).
9. If you want to return from external mode to the "CD"
or "Copy" mode, please reset the power by swit-
ching off/on the power button.
* Needs Nero version 5.5.9.8. or up version
Fig 7
Fig 8

Werbung

loading