Clock Reception; Clock / Calendar; Moon Phase; Auto Scanning Function - Oregon Scientific WMR80 Bedienungsanleitung

The battery icon indicator
following areas:
AREA
Weather Forecast Area
Temperature or
Humidity Area
Wind Speed / Wind
Direction / Wind Chil
Area
UVI / Barometer /
Rainfall Area

CLOCK RECEPTION

This product is designed to synchronize its calendar
clock automatically once it is brought within range of a
radio signal:
WMR80:
• EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
• UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
WMR80A:
• WWVB-60 signal: within 3200km (2000 miles) of Fort
Collins Colorado.
WMR80 only - slide the EU / UK switch to the appropriate
setting based on your location. Press RESET whenever
you change the selected setting.
The reception icon will blink when it is searching for a
signal. If the radio signal is weak it can take up to 24
hours to get a valid signal reception.
indicates the status of the clock reception signal.
ICON MEANING
Time is synchronized. Receiving signal is
strong
Time is not synchronized. Receiving signal
is weak
To enable (and force a signal search) / disable the
clock radio reception (clock synchronization):
1. Press SELECT to navigate to the Clock / Calendar /
Moon Phase Area.
will show next to the Area.
2. Press and hold SEARCH.
appears when it is enabled.
may appear in the
MEANING
Battery in the base station
is low.
The displayed channel
indicates the outdoor
sensor for which battery
is low.
Battery in the wind
sensor is low.
Battery in the UV / Rain
sensor is low.
NOTE For best reception, the base station should be
placed on a flat, non-metallic surface near a window in an
upper floor of your home. The antenna should be placed
away from electrical appliances and not be moved around
when searching for a signal.

CLOCK / CALENDAR

To manually set the clock:
(You only need to set the clock and calendar if you have
disabled the clock radio reception).
1. Press SELECT to navigate to the Clock Area.
show next to the Area.
2. Press and hold MODE to change the clock setting.
The setting will blink.
3. Press + / - to increase / decrease the setting value.
4. Press MODE to confirm.
5. Repeat steps 3 to 4 to set the time zone offset hour
(+ / -23 hours), 12 / 24 hour format, hour, minute,
year, date / month format, month, date and weekday
language.
NOTE If you enter +1 in the time zone setting, this will
give you your regional time plus 1 hour.
If you are in the US (WMR80A only) set the clock to:
0 for Pacific time
+2 for Central time
NOTE The weekday is available in English, French,
German, Italian, Spanish or Russian.
To change the clock display:
1. Press SELECT to navigate to the Clock Area.
show next to the Area.
2. Press MODE to toggle between:
• Clock with Seconds
• Clock with Weekday
• Calendar

MOON PHASE

The Calendar must be set for this feature to work (see
Clock / Calendar section).
New Moon
Waxing
Crescent
First quarter
Waxing
Gibbous

AUTO SCANNING FUNCTION

To activate the outdoor temperature and humidity
auto-scan function:
1. Press SELECT to navigate to the Temperature or
Humidity Area.
6
+1 for Mountain time
+3 for Eastern time.
Full Moon
Waning
Gibbous
Third
quarter
Waning
Crescent
will show next to the Area.
will
will