Clock; Clock Reception; Manually Set Clock - Oregon Scientific BAR 208HG Bedienungsanleitung

ICON DESCRIPTION
Main unit is searching for
sensor(s).
A channel has been found.
The sensor cannot be found.
TIP The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock
automatically with a clock signal.
Slide EU / UK to select the signal received.
• EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
• UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
To enable / disable signal reception:
Press and hold to enable or
reception.
NOTE Reception takes 2-10 minutes. If the signal is weak,
it can take up to 24 hours to get a valid signal. If signal
reception is unsuccessful, place your unit next to a window,
press and hold
Clock signal reception indicator:
STRONG SIGNAL

MANUALLY SET CLOCK

To set the clock manually, disable the signal reception
first.
1. Press and hold MODE.
2. Press
3. Press MODE to confirm.
4. The settings order is: time zone, 12/24 hr format, hour,
Time zone offset sets the clock +/- 23 hours from the
received clock signal time.
(D), French (F), Italian (I), and Spanish (S).
to disable signal
To select display mode:
Press MODE to choose between clock with seconds /
weekday / calendar / moon phase.
5
to force another signal search.
WEAK SIGNAL
or to change the settings.
minute, year, calendar mode (day – month / month – day),
month, day and language.
NOTE The language options are English (E), German
NO SIGNAL