Setting Up; Motor Type; Number Of Motors - Motostar SLS24 Bedienungsanleitung

SETTING UP

 After laying and connecting all the cables mentioned above, have skilled staff commission the operator by fi rst running the
following functions:
- type of motor (A1);
- number of motors (F46);
- motors test (A2)
Self-learning of the gate travel (A3).

Motor type

 The control board is not confi gured to control the gearmotors. You will need to confi gure it by setting function A1 as follows:
Select A1.
Press ENTER to confi rm.
Select 5 and press ENTER to confi rm the confi guration.

Number of motors

The control board is confi gured to control two gearmotors. To control just one gearmotor, set function F46 as follows:
Select F46.
Press ENTER to confi rm.
Select 1 and press ENTER to confi rm the confi guration for just
one gearmotor.
a I
5
F 4 6
i