Master & Dynamic MW50+ Benutzerhandbuch Seite 10

TURN ON AND CHARGE
•
To turn on the MW50+ slide the switch
to the middle position.
• Each time you turn on the headphone
the battery status will be displayed. To
recall battery status, slide switch to
for less than 2 seconds.
The headphone will automatically
•
search for previously connected
devices. A solid light indicates you
are connected. If no connection is
made after 2 minutes, the headphone
will enter deep-sleep mode. Cycle
power switch to awaken.
17
ON
Low Battery
Med Battery
Full Battery
Connected
Charging
• Plug in the USB-C
connector and connect
to a USB port to charge.
EN
• The headphone turns off
when the USB-C is plugged
in. Avoid using the device
while it is charging
•
A solid orange light
indicates charging and a
solid green light indicates
a full charge when the USB
cable is connected.
Charging Full Charge
18