LINCOS Ozontech KL-7 Bedienungsanleitung Seite 23

Ozone generator

7M protection class II devices
2. The highest permissible resistance of the ground wire (protective earth, PE) is 0,1.
3. The measurement results are positive, if:
 Rp  Rw and RPE  RPR, where:

Rp - measured insulation resistance

Rw - highest permissible insulation resistance

RPE - highest permissible wire resistance

Rrr-w - highest permissible protective conductor resistance
4. Prescribed testing intervals of the ozone generator

I. category: every 6 months (infrequent monthly use)

II. category: every 4 months (frequent use, 1-3 times a day)

III. category: every 2 months (continuous use in several shifts)
The categories were determined according to the "PN-88/E-08400/10: Electrically powered hand held
tools. Operational tests" standard.
NOTE: Shorten the examination intervals by half if the mechanical damage risk is high during the
operation of the ozone generator, for example if operated in humid rooms, under extreme conditions,
etc.
DISPOSAL
At the end of the product lifetime, it has to be disposed of, observing the currently effective regulations
and rules. This device contains metal and plastic parts, which can be recycled after separation and
sorting.
o
Dismantle the device.
o
Sort the parts according to their material (e.g. metal, rubber, plastic, etc.). Bring the sorted parts to
the local recycling facility.
o
Electrical waste (used electric tools, electric motors, chargers, electronic parts, batteries, etc.).
Dear Customer! According to the effective regional regulations electrical waste is considered
hazardous waste. Please perform the disposal of electrical waste according to the waste management
regulations effective in your country.
It is forbidden to mix electrical waste with household waste. A used electrical appliance can be brought
to a local recycling facility. You can receive more detailed information on electrical and hazardous
waste disposal from your local authority or on the Internet.
WARNING
If the device breaks down, please send it to the distributor for repairs. Please attach a short description
of the fault, this makes the repairs easier. If the device is still covered by warranty, also attach the
warranty card and the invoice or receipt. After the warranty period the repairs are performed at special
prices.
To avoid damage during transportation, package the device well or use the original packaging
material. We do not accept any responsibility for transportation damages caused by improper
packaging. If the customer makes a complaint at the freighter service, the method and the material of
the packaging plays a significant role in the assessment of a compensation demand.
Note: The figures and the content of the manual may slightly differ from the real products. This is a
consequence of the continuous product improvement. Slight differences of this nature do not influence
the functionality of the product.
 Lincos Kft.
KL-7
9