Peaq PMS300 Bedienungsanleitung Seite 50

49
Distortion of sound.
The display does not display any informa-
tion.
ERROR is displayed on the display.
The unit does not switch between input
modes.
The display does not show DAB informa-
tion.
Tick/blob sounds at some of the stations. Like all other digital media DAB is reproduced
Some of the conductor wires of the speaker
cable are in contact with each other which cau-
ses distortion.
Bass and treble controls are set too high in re-
lation to speaker specifications, the main volu-
me is set too high.
CD Player or DAB Receiver is defective and
should be serviced by a qualified technician.
The Receiver has not found any stations on
DAB.
The selected station does not broadcast any
information.
The antenna signal is too poor, please see the
section on adjusting the antenna.
in a very high sound quality.
But if the antenna signal is too weak, you will
not hear any whistling but instead you will hear
blackouts or "tick/blob" sounds.
Check if the antenna signal is strong enough.
See the section on adjusting the antenna.
ENGLISH