Peaq PMS300 Bedienungsanleitung Seite 46

45
CD/USB playback
Amplifier unit must be in CD mode to run CD
operation. Use buttons on remote control or
use respective operating elements on the
front panel of the CD Player.
To listen to MP3 or WMA Music Files insert
a USB Stick.
NOTE: Connect the USB device directly
to the USB port of the unit. Using an
extension cable is not recommended and
may cause interference and failure of data
transfer.
EJECT / LOAD A DISC
To open or close the disc tray, press the
OPEN/CLOSE button.
Playback starts automatically from first
track. If there is no disc in the tray or USB
device inserted, the message NO DISC will
be displayed.
PLAY / PAUSE
In stop mode, press once to start playback.
To pause the playback temporarily, press
once more; sound will be muted. To resume,
press again.
FAST FORWARD
FAST REWIND
During playback, press
or to rewind. Press
playback.
During playback, press
next track. To previous track, press
ce fast. If pressed once, current track will be
played from the beginning.
STOP PLAYBACK
Press
TRACK SELECTION
Press the recpective number button 0-9 /
+10 on the remote control.
During CD playback, press R E P E A T
repeatedly to activate the following repeat
functions:
– Repeat Title
– Repeat All
– Repeat Off
RANDOM
Press RANDOM to play all tracks in random
order.
TIME
Press TIME repeatedly to display:
– Current track / Elapsed time
– Current track / Remaining time
– Total tracks / Elapsed time
– Total tracks / Remaining time
to fast forward
to resume normal
PREVIOUS
NEXT
to stop the playback.
REPEAT
ENGLISH
to skip to the
twi-