Peaq PMS300 Bedienungsanleitung Seite 45

ENGLISH
Stereo Receiver functions
INFORMATION / RANDOM
In DAB or FM mode press INFO/RAN to ac-
tivate DAB information or RDS (Radio Data
System) on FM stations.
In iPhone mode press INFO/RAN to play all
tracks in random order.
AUTO TUNING
Press AUTO TUNE to auto scan and auto
stop when a new station is found.
EQUALIZER / BALANCE
1. Press FUN once to adjust Bass level.
2. Press FUN twice to adjust Treble level.
3. Press FUN three times to adjust Balance
(right/left) speaker output level.
Use VOL +/- to adjust each setting.
SUPER BASS
Press S.BASS once to increase +4dB at
100 Hz for more bass sound output; press
twice to cancel the function.
MANUAL TUNING
Press UP or DOWN to search for stations
manually.
iPHONE
Press iPhone to switch to iPhone input.
Make sure the iPhone dock is connected
correctly.
RESET EQUALIZER
Press EQ RESET to reset the euqalizer to
original settings. This does not effect the Su-
per Bass settings.
MUTE
To switch off the volume temporarily, press
MUTE. Press MUTE again to resume at
preset volume or cancel MUTE by pressing
VOL +/-.
AUX 1 / 2
Press AUX1/2 to switch from AUX1 to AUX2
input.
CD / USB
Press CD to switch to CD/USB mode. If
both a CD and USB device are connected,
CD playback will be prioritized.
DAB / FM
Press DAB/FM to switch from DAB to FM
radio.
VOLUME
1. Press VOL +/- to decrease or increase
the volume.
2. Turn the volume control on the front
panel right or left to increase or decrease
the volume.
44