Technical Parameters - Elko EP CRM-2HE Bedienungsanleitung

Technical parameters

Number of functions:
Supply terminals:
Voltage range:
Power input (max.):
Max. dissipated power
(Un + terminals):
Supply voltage tolerance:
Supply indication:
Time ranges:
Time settings:
Time deviation:
Repeat accuracy:
Temperature coeffi cient:
Output
Number of contacts:
Rated current:
Breaking capacity:
Inrush current:
Switching voltage:
Output indication:
Mechanical life:
Electrical life (AC1):
Controlling
Control. voltage:
Power the control input:
Load between S-A2:
Glow tubes connetions:
Control. terminals:
Reset time:
Other information
Operating temperature:
Storage temperature:
Electrical strength:
Operating position:
Mounting:
Protection degree:
Overvoltage cathegory:
Pollution degree:
Max. cable size (mm 2 ):
Dimensions:
Weight:
Standards:
CRM-2HE
2
A1 - A2
AC/DC 12 - 240 V (AC 50 - 60 Hz)
AC 0.7 - 3 VA / DC 0.5 - 1.7 W
4 W
-15%; + 10%
green LED
0.1 s - 100 days
rotary switch and external potentiometers
5 % - mechanical setting
0.2 % - set value stability
0.01 % / °C, at = 20 °C
1x changeover / SPDT (AgNi / Silver Alloy)
16 A / AC 1
4000 VA / AC1, 384 W / DC
30 A / < 3 s
250 V AC1 / 24 V DC
multifunction red LED
7
3x10
0.7x10 5
AC/DC 12 - 240 V (AC 50 - 60 Hz)
AC 0.025 - 0.2 VA / DC 0.1 - 0.7 W
Yes
No
A1-S
max. 150 ms
-20 °C to 55 °C (-4 °F to 131 °F)
-30 °C to 70 °C (-22 °F to 158 °F)
4 kV (supply - output)
any
DIN rail EN 60715
IP40 from front panel / IP20 terminals
III.
2
solid wire max. 1x 2.5 or 2x 1.5 /
with sleeve max. 1x 2.5 (AWG 12)
90 x 17.6 x 64 mm (3.5˝ x 0.7˝ x 2.5˝)
78 g (2.8 oz.)
EN 61812-1, EN 61010-1
Function
Cycler beggining with pulse
U
15-18 t1 t2 t1 t2
More accurate setting of timing for long periods of time
Example of time setting to 8 hours period:
For rough setting use time scale 1 - 10 s on the potentiomenter.
On the external potentiometer for fi ne adjustment of time to adjust 8 s, check accuracy
(eg. a stopwatch).
On rough time setting, set potentiometer to originally desired scale 1 - 10 hours, leave
a fi ne setting as it is.
Potentiometer
It is possible to connect the external operating potentiometer up to the distance of
maximally 10 meters (32.8 ft.) from relay CRM-2HE, for example in switchboard. The external
potentiometer has cover IP65 from the front side and IP20 from the rear side. It is absolutelly
necessary to connect potentiometer with the device in correct way. The terminals on the
device must be connected to the equally marked terminal on the potentiometer.
Potentiometer:
Protection degree:
2
Max. cable size (mm ):
Weight:
Warning
Device is constructed for connection in 1-phase installation of AC/DC 12-240 V main
and must be installed according to norms valid in the state of application. Connection
according to the details in this direction. Installation, connection, setting and servicing
should be installed by qualifi ed electrician staff only, who has learnt these instruction and
functions of the device. This device contains protection against overvoltage peaks and
disturbancies in supply. For correct function of the protection of this device there must
be suitable protections of higher degree (A, B, C) installed in front of them. According
to standards elimination of disturbancies must be ensured. Before installation the main
switch must be in position "OFF" and the device should be de-energized. Don´t install the
device to sources of excessive electro-magnetic interference. By correct installation ensure
ideal air circulation so in case of permanent operation and higher ambient temperature
the maximal operating temperature of the device is not exceeded. For installation and
setting use screw-driver cca 2 mm. The device is fully-electronic - installation should be
carried out according to this fact. Non-problematic function depends also on the way of
transportation, storing and handling. In case of any signs of destruction, deformation, non-
function or missing part, don´t install and claim at your seller.
2 / 2
Cycler beggining with pause
U
S
15-18 t2 t1
t1
47 kΩ, linear
IP65 from front side / IP20 from back side
1.5 with sleeve / without sleeve max. 2.5 (AWG 12)
15 g (0.5 oz.)
27
M 22x1
B1 B3 B2
15
t2 t1 t2