GFC MAGA Gebrauchs - Und Wartungsanweisungen Seite 10

di gianfranco conti - 20021 Bollate (MI) ITALY - Viale Lombardia, 18 - Telefono 02 38302386 r.a. - Telefax 02 38302389
1 - GENERAL RULES AND DIRECTIONS
1.1 - Introduction
The present manual belongs to GFC - Bollate. The contents of this document may not be repro-
duced or assigned to third parties. All rights reserved.
1.2 - Description of machine
The frame heater is a hot air blower for the softening of celluloid frames and similar material. The
frame heater permits a forced air ventilation, changing the desired power with the insertion of one
or two resistances. (The user will check on the reaction of the various materials to the temperature).
1.3 - Normative references
1.3.1 - Compulsory set of rules
- DPR 27.4.1955 n.547, "Rules for the prevention of industrial accidents".
- Law n.791 of October 18, 1977. Realization of directive of Board of European Community (n.
73/23/ECC) regarding safety guarantees with which electric material must be equipped when used
within certain voltage limits.
- EEC directive n. 73/23 with regard to low voltage, modified by EEC directive n. 93/68 of
22.7.1993.
- The machine complies with the CEDE rules and Departmental Order of April 10, 84 regarding the
suppression of strays.
1.3.2 - Additional voluntary set of rules
EN 292 (1992) Safety of machinery - Fundamental concepts, general design principals - First Part -
Basic Terminology and Methodology (EN 292-1) - Second Part - Technical specifications and prin-
cipals (EN 292-2).
EN 294 (1992) - Safety of machinery - Safety distance in order to prevent that upper limbs come
into contact with dangerous areas.
EN 60204 -1 - Safety of machinery - Electrical equipment of machines - Part 1. General requisites
(Revision of EN 60204-1)
EN 60529 (1992) - Safety of machinery - Protection degrees of casings (Code IP)
1.4 - Pre-arrangements to be carried out by client
The user installs MAGA in suitable surroundings equipped with an electric system corresponding to
the rules in force. In particular, the necessity of a conforming grounding is emphasized.
1.5 - Instructions for the request of interventions and spare parts
For any operation of electric maintenance, contact GFC of Bollate, Viale Lombardia, 18 or an
Authorized Assistance Centre.
ENGLISH Rev. 0/96 Pag. 4 di 8