Hilti TE 30-A36 Original Bedienungsanleitung Seite 20

Observe the information printed in the operating instructions concerning operation, care and maintenance.
Modification of the power tool or tampering with its parts is not permissible.
2.2 Chuck
TE‑C (SDS plus) chuck
TE‑T (SDS top) chuck
en Quick-release chuck
2.3 Switches
Speed control switch for smooth starting.
Forward / reverse switch
Function selector switch:
Drilling without hammering
Hammer drilling
Chisel adjustment (12 positions)
Chiseling
2.4 Grips
Pivotable side grip with depth gauge
Vibration-absorbing grip
2.5 Protective features
Mechanical slip clutch
2.6 ATC (Active Torque Control)
Electronic quick switch-off
2.7 Lubrication
Oil lubrication
2.8 Additional items required for operating the tool
A B36/6.0 Li‑Ion battery and a C4/36‑90 or C4/36‑350 battery charger.
NOTE
The C4/36‑350 charger is recommended. The charging time is longer when the battery is charged with the
other charger.
2.9 Items supplied as standard
1 Power tool
1 TE‑C chuck
1 Side handle with depth gauge
1 Operating instructions
1 Hilti cardboard box or toolbox
1 Cleaning cloth
1 Grease
20